Compact specialists: RTS 400 / DTS 400 / ETS 125

Festool Australia are excited to relaunch the new generation of compact sanders – RTS 400, DTS 400 and ETS 125.

ETS 125, DTS 400 & RTS 400

Festool New Generation Sanders ETS 125 DTS 400 RTS 400

Compact, ergonomic and lightweight – the new compact sanders can easily deal with the demanding day-to-day work. The new compact sanders are ideal for effortless sanding over sustained periods of time, and demonstrate a high level of flexibility. With their compact design and weighing only 1.2 kg, they are also ideal for overhead work. Perfect interaction between design, centre of gravity and a comfortable handle with Softgrip and the intelligently positioned operator switch, all three tools can be used by both left and right handed users.

The three new models not only excel in terms of weight, handling and ergonomics, but also when it comes to power output. Thanks to the special control electronics and a new motor design, an impressive 250W is transferred directly and virtually loss-free to the working surface. In this case, the idle speed of the RTS 400 orbital sander and of the DTS 400 delta sander is between 6000 and 12,000 revolutions per minute. The three compact sanders produce their best results with a 25 percent increase in material removal capacity (compared to the predecessor models).

Tech Specs OverviewRTS / DTS / ETS
Power250W
No-load speed6,000-12,000
Sanding stroke2mm
Weight1.2kg

DTS 400 Iron Head Orbital Sander

DTS 400

DTS 400

Festool’s DTS 400 is ideal for vertical services or overhead work. It will allow you to sand small surfaces, edges and get right into tight corners. Sand off paint and varnishes on window frames, sand natural timber and veneer prior to varnishing. It’s compact, light and ideal for one-handed operation.

Obtain perfect surface quality with fine and intermediate sanding applications, the DTS 400’s electronics and direct drive deliver controlled speed for a perfect finish.

Visit our website for more details and videos.

ETS 125 Random Orbital Sander

ETS 125

ETS 125

When you need to produce top-class results, the ETS 125 is an absolute must. The smooth-running sanding pad lays absolutely flat on the surface, producing a consistently perfect finish. Festool’s ETS 125 is the ideal solution for wooden surfaces and preparation work prior to varnishing, waxing or oiling. The eccentric sanding motion produces a scratch-free sanding pattern.

The multi-Jetstream design provides maximum suction with unbeatable performance. Festool offers a complete system including sanding pads and abrasives. The Multi-Jetstream principle ensures greater dust removal, cooler pad temperatures and longer abrasive life.

Visit our website for more details and videos.

RTS 400 REQ 1/4 Sheet Orbital Sander

RTS 400

RTS 400

Festool’s RTS 400 is ideal for vertical services or overhead work and is designed to get into narrow, confined surfaces that are difficult to reach. RTS 400 is perfect for surface preparation on woods, plastics or paints. It’s compact and light weight design makes it ideal for one-handed operation.

Obtain perfect surface quality with fine and intermediate sanding applications, the RTS 400’s electronics and direct drive deliver controlled speed for a perfect finish.

Festool’s new generation electric sanders are available with a wide range of accessories. Visit www.festool.com.au to learn more.